Width: 58" polyester knit 1 mil PUL
Sold by the yard, the inch, or the cut so you can get as much or as little as you need:
Cuts: Order "cuts" if you just want to make one diaper or fold the cut in half to make a wet bag. We have several sizes to choose from. You may even be able to get more than one XS diaper from the larger cuts (measure your pattern!)
Inches: Ordering by inches will give you a piece of fabric that is the number of inches long by whatever the width of the fabric is. Some examples: Ordering "20" inches will give you a 20"X58" piece of fabric. A 20" by-the-inch selection will make about 3-4 small to medium diapers, a 22" by-the-inch selection will make approximately 3-4 large diapers or one size diapers, and a 24" by-the-inch selection will make about 3 extra-large or one size diapers. Please measure your pattern before ordering. If you have any questions just ask :D
Warning! If you order "1" in the inches box you will only receive a 1" strip of fabric. This fabric is to be ordered by the inch. Diapers: To determine how many inches you need measure the length and width of your diaper pattern. For example - if your pattern is for a small it is probably around 16" wide and long. The PUL prints are between 42 - 60" wide so a 16" cut of 44" wide fabric will give you at least 2.75 diapers (44"/16"). Add a few more inches & you can stagger the diapers, which will use the fabric even more efficiently. With my pattern I can get 4 smalls from 20" of a 44" wide fabric.
Using polyester PUL diaper fabric results in less wicking & leaking!
1/8 yd = 5" |
2/3 yd = 24" |
1/4 yd = 9" |
3/4 yd = 27" |
1/3 yd = 12" |
1 yd = 36" |
1/2 yd = 18" |
2 yd = 72" |